Home > News > Content

Wind Reduction Is The Best Method For Refining Titanium Products

- May 08, 2018-

Wind reduction is the best method for refining titanium products, but it is not suitable for titanium products for long periods of time. Wind reduction and low pressure do not exceed 2 hours. In order to compensate for the lack of heat for the furnace charge and to prevent the furnace from cooling, the titanium product must be lightly coke charged, depending on the depth and timing of the feed line, and usually a light coke charge of 10% to 30%. Equipment problems; reduce the wind to the lowest level promised by the blast, only the tuyere does not come to slag.

Related News

Related Products

  • Nickel Equipment Nickel Heat Exchanger Nickel Pressure Vessel
  • API 610 Standard Chemical Centrifugal Titanium Pump
  • ASTM B348 Titanium Alloy Bar
  • Titanium Hexagon Hex Head Bolts
  • Grade 9 Titanium Sheet
  • Grade 12 Titanium Stub Ends